SeaLand 3100 Instructions d'exploitation

Triplex CeramicPlunger PumpOperating Instructions/Repair and ServiceManualSeriesMP4130-3100Contents:Installation Instructions: page 2Pump Specificatio

1038. Reassemble the inlet valveassembly in the reverse or-der of step #7. Make certainall the components are pressfit together and that thespring re

11Preventative Maintenance Check-List & Recommended Spare Parts ListCheck Daily Weekly 50hrs Every Every Every500 hrs 1500 hr

GIANT INDUSTRIES, INC., 900 N. Westwood Ave., P.O. Box 3187, Toledo, Ohio 43607PHONE (419) 531-4600, FAX (419) 531-6836, www.giantpumps.com Copyrigh

2INSTALLATION INSTRUCTIONS4. Use of a dampener is necessary to minimizepulsation at drive elements, plumbing, connec-tions, and other system areas.

3U.S. (Metric)Volume ... Up to 15.2 GPM ... (57 LPM)Discharge Pressure...

4Exploded View - MP4130-3100 Series

5ITEM PART # DESCRIPTION QTY.1 06100 Crankcase 12 13000 Oil Filler Cap Assy 14 07243 Cover, Crankcase 15 07244 O-Ring, Crankcase Cover 18 01008 Oil D

61. With a 27mm wrench,remove the three dischargeplugs (#48) and three inletplugs (#42A) from themanifold (#43).2. Inspect the plug o-rings(#48A and #

78. From the back of themanifold (#43), remove thepacking assembly (#'s 42,41, 40, and 39) by tappingassembly out from theback to the front.9. Tu

8Gear End DisassemblyNote: Make certain that the plungers (29B) have been removed before starting the following sequence.12. Make sure the oil is drai

929. Replace any shims (#20A) and position the bearing cover (#14) as before. Tighten the bearing cover bolts (#17)evenly to position the bearing rac