Sealand Diptube Kit Manuel d'utilisateur télécharger pdf

1. Drill a 3-inch (76 mm) diameter hole on a at spot on top of

the holding tank with a 3-inch hole saw.

2. Determine the required length of the PVC pipe, using the

formula below:

3. Cut pipe squarely and remove burrs.

4. Clean all surfaces with PVC cleaner. Following instructions

SeaLand

Diptube Kit Installation Instructions

600343903

Dometic Corporation

13128 State Rt 226

PO Box 38

Big Prairie, OH 44611

on PVC cement, assemble pick-up adapter to one end of pipe.

5. Slide sealing grommet onto PVC pipe, with wide end toward top of pipe (see diagram).

6. Assemble top tting to PVC pipe with PVC cement.

7. Lubricate inside surface of sealing grommet and outer diameter of narrow end of top tting with liquid

dishwashing soap.

8. Insert the diptube assembly into the 3-inch hole and press the sealing grommet into the hole.

9. Insert the diptube assembly into the sealing grommet.

Sealing grommet

Top ﬁtting

1.5 in (38 mm)

PVC pipe

Pick-up adapter

A – 2.875 in. (73 mm) = B

A = Height from bottom to top

surface inside tank

B = Required length of PVC pipe

Page 1

1. Drill a 3-inch (76 mm) diameter hole on a at spot on top of the holding tank with a 3-inch hole saw. 2. Determine the required length of the PV

Pas de commentaire

Sealand Diptube Kit Manuel d'utilisateur