Sealand Bowl Reinforcement Bracket Manuel d'utilisateur télécharger pdf

Toilet Bowl

Reinforcement Bracket

Installation Instructions

MODEL INFORMATION

Item Number Description

385310855 Bowl Reinforcement Bracket, Tall Base

385310856 Bowl Reinforcement Bracket, Short Base

INSTALLATION INSTRUCTIONS

1. Remove toilet seat from toilet bowl (if attached).

2. Thread one jam nut onto one end of each threaded

rod, letting about 1/2-inch of rod through nut.

3. Thread rods into inside threaded holes on floor

bracket (see illustration) until flush with bottom

side of bracket. Tighten jam nuts to floor bracket.

4. Make sure plastic cover is in place on threaded

rod (see illustration). Thread one jam nut and one

coupling nut onto each threaded rod at end oppo-

site of floor bracket. Allow rod end to protrude

slightly above coupling nut. This completes the

floor bracket assembly.

5. Fasten toilet seat and lid onto toilet bowl with truss

head machine screws and plastic hinge nuts.

(NOTE: Nylon screws supplied with seat are not

to be used in this installation.) Thread a jam nut

onto end of each truss head machine screw until

it touches plastic hinge nut.

6. Position floor bracket assembly behind toilet bowl

(as shown). The tops of the threaded rods should

be aligned with the bottoms of the truss head

machine screws.

7. Attach the floor bracket assembly to the bowl by

threading the coupling nuts onto the truss head

machine screws. The coupling nuts should be

threaded onto truss head machine screws and

threaded rods equally. Secure the coupling nuts

in place by tightening the jam nuts above and

below to the coupling nuts.

8. Be sure both toilet base and floor bracket plate

are flat on floor. Bracket height adjustments can

be made with the coupling nut.

9. Secure floor bracket assembly to floor using

appropriate methods (machine screws are shown

in illustration). Methods will vary according to floor

type. Make sure of clearances under floor before

drilling.

600344297 12/03

Truss Head Machine Screws (2)

Coupling Nuts (2)

Jam Nuts (6)

Threaded Rods

and Covers (2)

Floor Bracket

Plastic Hinge Nuts (2)

Dometic Corporation • Sanitation Systems

13128 State Rt. 226, P.O. Box 38

Big Prairie, OH 44611-0038 USA

330-496-3211

1-800-321-9886 • Fax: 330-496-3097

® Registered; ™ Trademark of Dometic Corporation

Résumé du contenu

Page 1 - Installation Instructions

1Toilet BowlReinforcement BracketInstallation InstructionsMODEL INFORMATIONItem Number Description385310855 Bowl Reinforcement Bracket, Tall Base38531

Commentaires sur ces manuels

Pas de commentaire

Sealand Bowl Reinforcement Bracket Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Sealand Bowl Reinforcement Bracket. SeaLand Bowl Reinforcement Bracket User Manual [de] [en] [fr] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Sealand Bowl Reinforcement Bracket