TankSaver
®
Holding Tank Relief Valve Instructions
Sealing
ring
Holding
tank
TankSaver
valve
600344478
Dometic Corporation
13128 State Rt 226
PO Box 38
Big Prairie, OH 44611
1-800-321-9886
© Dometic Corporation
Install on top surface of holding tank where accessible
and the free flow of air into the valve is not restricted.
1. Drill a 3-inch (76mm) hole in a at spot on top of holding
tank with a 3-inch hole saw.
2. Insert rubber sealing ring into 3-inch hole.
3. Lubricate the inside surface of the sealing ring and the
outside surface of the TankSaver valve with liquid
dishwashing detergent.
4. Insert the TankSaver valve into the sealing ring.
Commentaires sur ces manuels